About Our Business:   You have a job to do on a second-floor window but you find that
the window is located above a hillside or some other type of uneven ground. The
problem is that one of the ladder legs is unsupported and now you have to come up
with a safe way  to support this leg. Finding the right combination of boards, blocks and
bricks to do this is time consuming and is not recommended by the American Ladder
Institute in Chicago. If you had a Stabiladdler, you'd be working by now and you'd be
working safely.    
Joseph Vega,inventor of the Stabiladder, came up with the idea for the ladder leveling device
after his son fell from a ladder that was being used on a 20 degree slope.  Mr. Vega used his
experience  of 50 years of wood working and carpentry to build a wooden prototype that evolved
into an adjustable ladder stabilizer that can accommodate changes in grade of up to 30 degrees
depending on the composition of the surface the ladder is standing on. ( If the surface is
slick,Stabiladder doesn't recommend using a ladder or a Stabiladder without decuring or bracing
the base of the ladder.)                                           The heavy-duty ladder stabilizer known as
"STABILADDER" is made of 3/16-in.thick extruded aluminum and requires only a couple of
minutes to slide into position under the two bottom ladder rungs of the ladder leg that needs to be
adjusted. The body of the "STABILADDER" is secured to the ladder leg by two thumb screws and
the design of the body. The telescoping aluminum leg can be adjusted to level the ladder on
uneven ground. The telescoping leg of the "STABILADDER", which is held in place with a steel
pin, can be adjusted up to 15in. in 1-in. increments .  Mr. Vega's idea evolved into two types of
"STABILADDER" devices.                                                                                                                         
                                                                                                                                                                        
         Model 1                                                  Model 1x2 comes with 2 Stabiladder          
                                                                            ladder levelers, ready to go to work.            
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                 
The 'STABILADDER" can be used with all standard-rung extension ladders ,on either side of the
ladder. Stabiladder Inc. has a industrial-commercial model that meets ETL teating requirements
and a heavier model for 14in. spaced ladder rungs on fireman's ground ladders that meets
NFPA-1931 requirements. It is Stabiladder Inc.'s Mission is to provide people that work with
ladders a safe way to use ladders on uneven surfaces with a device that is easy and quick to use
and requires no special tools to install. It can be used on more than one ladder and is not a
permanent  part of the ladder . If it is not needed it can be stored in your tool box  and then
brought out to be used when needed. This device is well built and can provide a safe working
environment when used properly, with extension ladders on uneven surfaces.                                     
                            Stabiladder exceeded every test that it was subjected to. Meets the ETL and
NFPA-1931 requirements. It is the original removable ladder leveler safety device.
Click on any picture for close up
This device will fit on aluminium, fiberglass, and wooden extension ladders that do not
have a small brace from the side rail to the bottom of the first ladder rung. If there is no
brace then this device will mount properly. Please read  all instructions and caution labels
on the ladder and the Stabiladder  ladder leveler unit. If you have any questions call or
e-mail us. Think safety first!
Stabiladder Inc.- Ladder levelers:  P.O.box 172 , Marathon,
N.Y. 13803.  Inventors of a  ladder leveler safety device. A
ladder safety accessory that is heavy duty and removable. It
can be mounted on the left or right leg of the ladder.
$129.00
$250.00
The Stabiladder Model 2 is for firemans ground ladders and not for
sale to the general public. It meets NFPA-1931 requirements for use
on firemans ground ladders. The model 2 is very strong and only fits
extension ladders that have a 14in.space between the ladder rungs
you must call to make a special order! 607-849-7972 or 607-849-6917